accent pillow case baby canvas baby decoration How to Sew A Twin Duvet Cover funny cushion covers

First we showed you?How to Sew A Duvet Cover?and gave you measurements for all different sizes. ?Well, Scarlet outgrow the crib size duvet I made, so it was time for a twin.How much fabric do you need to sew a twin duvet cover?...

First we showed you?How to Sew A Duvet Cover?and gave you measurements for all different sizes. ?Well, Scarlet outgrow the crib size duvet I made, so it was time for a twin.How much fabric do you need to sew a twin duvet cover? This question is so hard to find an answer to out there on the Internets –; so much conflicting info.So, I was left to my own devices to figure it out, and because I love you, I will tell you how much fabric you need to sew a twin duvet cover, and how I pieced it together to get the most of my yardage.

Check out How to Sew a Twin Duvet Cover after the jump…;

most popular housewarming gifts

How to Sew A Twin Duvet Cover

For this duvet cover, I used some beautiful (girly but modern!) fabric:?Anna Maria Horner Innocent Crush (Home Decor Weight) Bubble Burst in Berry.

I ordered this twin comforter?which was the least expensive decent one I could find on amazon. ?It’;s a standard size of 66″;x86″;. Many twin comforters will vary from that by an inch or two (or more)accent pillow case baby canvas baby decoration, so just measure yours first and account for an difference when cutting your fabric.

So, how much fabric do you need to sew a twin duvet comforter? ?You need 7.5 yards of 54″; wide fabric. ?Home decor weight fabric is 54″; wide. ?Let me tell you how I came to this in a very confusing manner, then show you a diagram so it all makes sense (hopefully).

Now, you could create two flat panels for either side of the duvet by piecing your fabric together, but I wanted to use as little as possible of my fancy fabric to get the most out of it. ?To do that, I started by cutting the entire width of my fabric (this is home decor fabric so it is 54″; wide) to the length I needed it, which is the length of the duvet plus 4 inches. ?So 86″; 4″;= 90″; long, which is 2.5 yards. ?So cut that, and you have 2 panels 54″; wide and 2.5 yards long. ?Thats a total of 5 yards used so far.

Now we need to increase the width from 54″; to 66″; on both panels, plus seam allowances. ?We don’;t want a seam on only one side of our duvet –; that would look unbalanced, we need to have the seams on both sides of our center panels we just cut. ?So we could cut four strips –; two for the top and two for the bottom, then create two flat panels, but that would be lots of extra work. ?Instead, I decided to cut only two strips that would wrap around the sides of the duvet, attaching to the front and back panel. ?Here is how I figured it:

54″;-2″; for seam allowances = 52″; is what we have on each panel so far.66″; 2″; for the thickness of the comforter = 68″; is what we want on each side68″;-52″;=14″; is what we need on either side of each panel.14″; 4″;?for seam allowances = 18″; panels.

We already know our length is 2.5 yards. ?So cut 2 strips 2.5 yards long by 18″; wide. ?You will have an additional piece of fabric 18″; wide X 2.5 yards leftover to make pillows, ruffles, or other accents with.

So start with one of your 54″;X2.5 yard panels. Along the 2.5 yard side, sew one of your 18″;X2.5 yard strips to it using a 1″; seam allowance (it’;s that large because I used a french seam).

Then sew the other 18″; strip to the other side of the 54″; panel.

Now grab your other 54″; wide X 2.5 yard panel. ?Sew it to one of the side panels along the 90″; side.

Now bring the two unfinished 90″; edges together and sew the seam, creating a tube.

Now we want to center the two 54″; wide panels by folding the side panels in half, so they go from 16″; to 8″; with a fold. ?Iron.

Now with your duvet inside out, sew the top side closed and finish the edge by serging, sewing with a ziz zag stitch, or cutting with pinking shears.

Now I wish I had taken pictures of this but I didn’;t so bear with me. ?You can also?head over to our original duvet cover tutorial here, and look at the pics from step 3. ?But what you want to do on the bottom of the duvet is fold the entire seam under 1/4″; and iron and sew in place. ?Now fold it in another 2″; and iron. ?Lay it flat and sew from the corner 17″; in and back stitch. ?Repeat on the other corner. ?Attach your snaps or velcro to the inside flap you just created. ?Yeah, way confusing without pics right? ?Check the original duvet tutorial for pics.

Did this just ?make it more confusing? ?Sigh, I tried! ?Despite this seeming a little confusing, once you are sewing it, it is actually a VERY simple project. ?It’;s just a lot of fabric to work with.


Time to hide from daddy!

Sleep tight little bean.

I can’t even tell you how happy this recent warm Colorado weather has made me.? It has brightened up our home and has helped give these lingering colds/infections the boot.? We’ve had the windows open and have been playing outside.? It’s been so refreshing.? (I hear there’s snow in the forecast for this week……but I’m ignoring that.)

Every woman needs a beautiful flower bag

Related Articles